GPI FM Approved Remote Kit Assembly for All Q9 Meters
A Factory Mutual (FM) Approved Remote Kit Assembly modifies GPI Electronic Digital Meters for applications in specialised situations including remote indication and high or low fluid temperature metering applications. This kit provides the versatility of panel mounting on the LCD readout up to 100 ft from the turbine. It consists of a sensor module, a dust cover assembly and 10 ft of cable. In addition requires a complete meter with display.
Features and Benefits:
- Battery powered from meter
- Kit can upgrade existing GPI meter or can be purchased with a new meter.
- Accommodates fluid temperatures from -40°F to 250°F depending on the meter.
- Maintains FM Approval
GPI Standard Remote Kit Assembly
The Standard Remote Kit Assembly modifies Electronic Digital Meters for applications in specialised situations including remote indication and high or low fluid temperature metering applications. This kit also provides the versatility of panel mounting of the LCD readout up to 300 ft. (90 m) from the turbine housing and sensor. It also consists of a sensor module, a dust cover assembly and 10 ft. (3 m) of cable. Requires a complete meter with display.
Features and Benefits:
- Accommodates fluid temperatures from -40° F to +250° F (-40° C to +121° C) depending on meter.
- This kit can upgrade an existing FLOMEC® meter or can be purchased with a new meter.
- Battery powered from meter; no additional power required.
GPI Pulse Access Module (For G2)
The Pulse Access Module provides an unscaled, digital signal from your GPI meter by accessing circuitry from the on-board computer readout. It comes complete, ready to install, with a circuit assembly, cover plate assembly and 10 ft. of cable. However, the Pulse Access Module requires both a GPI Turbine and an 09 Computer Electronics which are sold separately.
Features and Benefits:
- Provides a digital Open Collector signal
- Can transmit signal up to 5,000 ft (1.5km)
- Communicates with most digital process control devices and its easy to install
- Operating temperature range of +14°F to 140°F (-10°C to +60°C)
GPI FM Approved Sensor Kit (For G2)
The Factory Mutual (FM) Approved Sensor is designed for use with any G2 Turbine Meter when rotor pulse data is required and the meter is located within a hazardous location. The output signal is compatible with existing FLOMEC® remote electronics. Use on G2 “Turbine Only” model. This kit includes pickup, screws, coverplate and jam nut. Connection Kit sold separately.
Features and Benefits:
- Mounts to any G2 meter housing via the coverplate.
- Ideal for indoor or outdoor applications.
- Factory Mutual (Intrinsic Safe) Class 1, Div. 1, Groups ABCDEFG.
GPI CONDITIONED SIGNAL OUTPUT MODULE (FOR G2)
This module provides an unscaled, amplified, digital signal capable of transmission up to 5,000 ft. (1.5 km).There is no need for additional signal conditioning or amplification devices to achieve the desired digital signal. Use on G2 “Turbine Only” model. The module is factory assembled for Open Collector signal output and operates from an external 9 to 35 volt power source. By changing terminal connections and adding a battery kit, the module provides a self-powered 6-volt Square Wave signal.
Features and Benefits:
- Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices.
- Operating temperature range of -40° F to +212° F (-40° C to +100° C).
- Can be externally powered or battery powered
GPI EXTERNAL POWER MODULE (7-10V DC) (FOR G2)
Combine the External Power Module and the Pulse Access Module to provide external power capabilities to a Electronic Digital Meter. The module is designed to provide regulated power to the Computer Electronics. The batteries then become a backup or auxiliary power source. If desired, a pulse output may be accessed. The unscaled, digital signal is capable of transmission up to 5,000 ft. (1.5 km).
Features and Benefits:
- Internal batteries become a backup or auxiliary power source.
- Operating temperature range of+14° F to +140° F (-10° C to +60° C).
- Input power is 7 to 30 volt external power.
To buy the External Power Module Click Here - External Power Module
GPI 4-20MA MODULE (FOR G2)
Combine the 4-20 mA Module with an Industrial Grade Turbine and Computer Electronics to provide an industry standard analogue signal for connection to a wide variety of chart recorders, display equipment and process control equipment. This module outputs an analogue signal which is directly proportional to the frequency of the digital output. With some simple adjustments, you can scale the module to represent whatever range is desired. Kit comes with circuit, assembly, enclosure and screws.
Features and Benefits:
- Communicates with most analog process control devices.
- Operating temperature range of +14° F to +140° F (-10° C to +60° C).
- Module installs on all turbine sizes.
- Provides external power to computer electronics.